In-Rail-Mini-Analog DZU 1451
/ DZU 1452 |
DZU1451
/ DZU1452 인레일미니 초슬림형
아날로그 신호변환기용 전원공급 단말기 In-Rail-Mini Analog
Power Terminal
DZU 1451 /
DZU 1452
인레일버스(In-Rail-Bus)의
확장
최대
7개의 초슬림형 아날로그 신호변환기를 연결할
수 있는 새로운 인레일미니(In-Rail-Mini)는
저비용, 소형 시스템 구축에 용이합니다.
Extension
of the In-Rail-Bus:
The
new In-Rail-Mini for up to 7 devices facilitate
the construction of a low-cost and small
system.
|
소형 인레일버스 설치를
위한 경제적인 비용의 효율적이고 빠른 솔루션
In-Rail-Mini는 In-Rail-Bus 커넥터에 전압 24V DC의
전원을 공급하는데 사용됩니다. 라인 E는 그룹 메시지에 사용할 수 있습니다. (예: 그룹 오류 메시지).
인레일미니(In-Rail-Mini)는 7.5mm 및 15mm의 DIN 레일 깊이에 사용 가능합니다 (주문 정보 참조).
for small applications with In-Rail-Bus
Cost-effective and fast solution for small In-Rail-Bus installations. The In-Rail-Mini is used to put the supply voltage 24 V DC into the In-Rail-Bus connector. Line E is available for group messages, e.g. for a group error message. The In-Rail-Minis are available for DIN rail heights of 7.5 mm and 15 mm (see order information). | In-Rail-Mini Analog | Supply voltage | 24 V DC (working range 16.8 V … 32 V DC) | Input current | ≤ 1 A (Fuse recommendation 1.25 AT) | Modules amount | Max. 7 DRAGO Modbus Modules DMB series | Group message E | Group message | Connection (captive clamp screws) | 0.08 ... 1.5 mm² / AWG 28 ... 18 with ferrule Stripped length: 7 mm / 0.3 in Screw terminal torque: 0.22 ... 0.25 Nm / 0.15 ... 2.2 lbf in | Dimensions | DZU 1451: 35 x 7.5 mm DIN rail DZU 1452: 35 x 15 mm DIN rail Full length 70 mm, available module space 50 mm |
Terminal assignments Terminal | 1 | 2 | 3 |
---|
Conductor strip | E | C | D | Signal | Group Message | GND | +24 V |
모듈의 설치 위치에
주의하십시오! 모듈을 거꾸로 설치하지 마십시오.
Observe the installation position of the modules!
Do not snap the modules upside down.
제품
주문 코드 Order Codes
품목
|
|
주문번호 |
In-Rail-Mini Analog for DIN rail
|
Din
Rail
|
35
x 7.5mm
|
35 x 15mm
|
아날로그
신호변환기용 (Analog)
|
DZU
1451
|
DZU
1452
|
여기에
표기된 사양들은 예고 없이 변경될 수 있습니다! (Specifications
listed here are subject to change without notice!)
|