|
드라고
신호변환기 인기제품
|
|
Input: | 0...20 mA, 4...20 mA, 0...10 V | Output: | 0...20 mA, 4...20 mA, 0...10 V | Power supply: | 20 ... 253 V AC/DC | Features: | Pluggable screw clamp terminals, calibrated signal setting, protective separation, housing width: 12.5 mm |
|
|
Input: | 0 to 20 mA, 4 to 20 mA, 0 to 10 V | Output: | 0 to 20 mA, 4 to 20 mA, 0 to 10 V | Power supply: | 24 V AC/DC | Features: | Protective separation, housing width: 11.2 mm |
|
|
DC58
경제형 루프 전원 트랜스미터 신호중계기
Passive Transmitter Repeater DC 58
Input: | 4 to 20 mA | Output: | 4 to 20 mA | Voltage drop: | Approx. 4.7 V | Features: | Protective separation, housing width: 11.2 mm |
|
|
DB6200
고성능 슬림형 범용 신호변환기 Bipolar Isolation Amplifier DB 6200
Input: | 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero | Output: | 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero | Power supply: | 20 to 253 V AC/DC | Features: | Pluggable screw clamp terminals, zero/span compensation, protective separation, housing width: 12.5 mm |
|
|
DH18
경제형 루프 전원 신호 아이솔레이터
Passive Isolator DH 18
Input: | 0(4) to 20 mA | 1- and 2-channel versions | Output: | 0(4) to 20 mA | Voltage drop: | < 3 V | | Features: | Protective separation, housing width: 11.2 mm |
|
|
Input: | 0 to 20 mA, 4 to 20 mA, 0 to 10 V | Output: | 0 to 20 mA, 4 to 20 mA, 0 to 10 V | Power supply: | 20 to 253 V AC/DC | Features: | Pluggable screw clamp terminals, calibrated signal setting, housing width: 12.5 mm |
|
|
DT45000
초슬림형 범용 온도센서 신호전송기 (트랜스미터) Temperature Transmitter DT 45000
Sensor Input: | Resistors: Pt 100, Pt 200, Pt 500, Pt 1000, Ni 100, Ni 200, Ni 500, Ni 1000; Thermocouple: B, E, J, K, L, N, R, S, T, U, W5Re_W26Re, W3Re_W25Re; KTY, resistor, mV and potentiometer measuring | Output: | 0 to 20 mA, 4 to 20 mA, 0 to 10 mA, 2 to 10 mA 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V | Measurement Ranges: | -270 to +2315 °C, according to sensor type | Power Supply: | 24 V DC | Features: | Protective Separation, Housing width: 6.2 mm |
|
|
DS7200
고성능 슬림형 션트저항 / mV 신호변환기
Shunt / mV Isolation Amplifier DS 7200
Input: | 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±250 mV, 0 to ±300 mV, 0 to ±500 mV | Output: | 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero | Power supply: | 20 to 253 V AC/DC | Features: | Pluggable screw clamp terminals, zero/span compensation, protective separation, housing width: 12.5 mm |
|
|
DS75000
초슬림형 션트저항 / mV 신호변환기
Shunt / mV Isolation Amplifier DS 75000
Input: | 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±250 mV, 0 to ±300 mV, 0 to ±500 mV | Output: | 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero | Power supply: | 24 V DC | Features: | signal setting with DIP switches, zero/span compensation, protective separation, housing width: 6.2 mm |
|

|
DMB96500
초슬림형 범용
AI / DI 모드버스 RS485 통신
모듈 Universal AI
/ DI Module DMB 96500
Sensor input: | Standard signals: 0/4 to 20 mA, 0/2 to 10 V, 0/1 to 5V Current: ±1 mA, ±20 mA, ±100 mA Voltage: ±1 V, ±10 V, ±100 V, ±300 V mV/Shunt Voltage: ±50 mV, ±100 mV, ±500 mV Resistance: 5 kΩ, 20 kΩ, 100 kΩ Potentiometer: 500 Ω, 3 kΩ, 50 kΩ, 100 kΩ Pt: Pt100 ... Pt 10000, JPt50, JPt100 Ni: Ni100 ... Ni1000 KTY: 66 types Thermocouple: A,B,C,D,E,J,K,L,N,R,S,T,U Binary-/Switching input: PNP, NPN, Push-Pull, Contact, NAMUR, S0-Switch | Bus protocol: | Modbus RTU | Power supply: | 24 V DC | Features: | Protective Separation, Housing width: 6.2 mm |
|
|
DG35200
초슬림형 범용 신호 알람 릴레이 / 오픈콜렉터 출력 Limit Alarm Unit DG 35200
Input: | 0(4) to 20 mA, ±20 mA, 0 to 10 mA, ±10 mA, ABS 20 mA 0 to 10 V, ±10 V, 0 to 5 V, ±5 V, ABS 10 V 4 to 20 mA / NE43 | Output relay: | 250 V AC, 30 V DC, 2 A | Power supply | 24 V DC | Features: | Signal on In-Rail-Bus E (supply circuit) at device failure, cable break und short circuit Housing width: 6.2 mm |
|

|
DMB96400
초슬림형 4 채널 2
AI
/ 2 AO 모드버스
RS485 통신 모듈 4
Channel 2 AI / 2 AO Module DMB 96200
Input: | 0 to 10 V,
0 to 20 mA | Output: | 0 to 10 V,
0 to 20 mA | Bus connection: | Modbus RTU | Power supply: | 24 V DC | Features: | Protective 5 port separation up to 300 V AC/DC Housing width: 6.2 mm |
|
|
DR48
경제형 2선식 / 3선식 Pt100
온도센서 RTD 신호전송기 (트랜스미터) Temperature Transmitter DR 48
Sensor input: | Pt 100, 2- or 3-wire connection | Output: | 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V | Ranges: | -100 to +450 °C (32 types) | Power supply: | 24 V AC/DC | Features: | Protective Separation, housing width: 11.2 mm |
|
|
DR41
경제형 저항 신호전송기 (트랜스미터) Resistance Transmitter DR 41
Mesuring ranges: | Fixed ranges within 20 Ohm ... 1 MOhm, see product line | Output: | 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V | Power supply: | 24 V AC/DC | Features: | Protective Separation, housing width: 11.2 mm |
|

초슬림형 - 이제 Push-In
연결기술로!

|
DRAGO 6mm 신호변환기 - 2.5mm² 케이블까지 가능한 Push-in 연결기술이 적용된
스프링 작동 단자 및 통합 테스트 포인트
빠른 진단 통합 테스트 포인트를 통해 현장에서 빠르고 간단하게 진단할 수 있습니다.
개선된 사용자 인체공학 테스트 프로브 (Test probe, Ø 2 mm)가 제자리에 고정되어 점검자에게 작업공간이
추가로 제공됩니다
편리한 직접 연결 시인성이 뛰어난 해제버튼을 사용하여 간단한 도구로 케이블을 신속하게 분리할 수 있습니다.
도구 없이 배선 완료
설치작업을 최소화하기 위해 Push-in 연결기술 (스프링
힘)을 사용하여 배선이 간단하고 공구가 필요하지 않습니다.
설치시간 절약
선택사양인 마운팅 레일 버스(Mounting rail bus)는 배선작업 없이 그리고 중단
없이 쉽게 설치할 수 있습니다.
모든 기능을 한눈에
각 장치에 대한 즉각적인 진단 - 앞면의 상태 LED를
통해 간단하게
|
+++ 슈퍼 컴팩트
+++ 푸시인(Push-In) 연결 기술!
푸시인( Push-in)
연결기술 및 통합 테스트 포인트에 스프링
단자가 있는 DRAGO 6mm 신호변환기
간편한 직접 연결, 공구 없이도 배선 완료,
설치 시간 절약, 신속한 진단
푸시인(Push-In)
연결 단자 신호변환기 배선 동영상 보기
|

|
|